Injection for consolidation and reinforcement of walls

Lime Injection	LIME INJECTION is a binder for the consolidating injection of walls in bricks, stones or mixed. The setting and hardening is based on the lime-reactive silica reaction and the presence of hydraulic lime, without the harmful soluble salts.
Lime injection 9000	LIME INJECTION 9000 is a binder for the consolidating injection of walls in bricks, stones or mixed. The setting and hardening is based on the lime-reactive silica reaction and the presence of hydraulic lime, without the harmful soluble salts. Due to the exceptional flowing properties and the very fine particle size of the fillers, allow deep penetration into the substrate porosity and cracks even smaller than 1.5 mm.
Bs40 Iniezione	Microbeton BS 40 injection is a product in powder, based on cement , selected silica and special additives , which forms after mixing with water a very fluid slurry which can be injected in cracks , cavities, aggregate conglomerates . The product has very high mechanical resistance, is without shrinkage or „bleeding
Tecnoepo IN03	Synthetic binder formulated as performing adhesive, and sealant, based on low viscosity epoxy resins. The product has 2 components, and cures, after mixing, at ambient temperatures. Solvent free.